4" SUBMERSIBLE WELLPUMP GRUNDFOS SP 3A-15 1,1kW 3x400V WITH 30m CABLE AT A SPECIAL PRICE ONLY WITH F

Well pump 4" from Grundfos - at a special price only in connection with our well construction packages.

The Grundfos submersible pumps of the "SP 4" series can be found wherever submersible pumps are used for professional applications.

Areas of application:

    Drinking water supply
    Filling of tanks
    Irrigation
    Groundwater lowering
    Irrigation of large sports fields and golf courses
    Field irrigation
    Seawater pumping
    Environmental protection applications

Installed frost-proof in the well, the SP submersible pump does not cause any disturbing operating noise. Power is supplied by means of three-phase alternating current (power current) 3 x 400 V, 50 Hz. All parts of the pump that come into contact with the water are made of corrosion-resistant stainless steel 1.4301 (AISI 304), which ensures a long service life and does not affect the quality of the water.
The pump is equipped with a flanged 3-phase glandless submersible motor with sand deflector, liquid-lubricated plain bearings and expansion diaphragm. The motor is characterised by high efficiency over a wide power range. The pump is equipped with two eyelets for attaching the (stainless steel) rope safety device. SP series pumps are supplied from the factory with a replaceable motor cable.

Operating data:
 Manometric head in m 90 80 70 60 50 40 30
 Flow rate in m3/h 0.75 1.95 2.75 3.3 3.7 4.0 4.3

Advantages:

    Incl. 30m cable (factory-shrunk, free cable end)
    State-of-the-art hydraulics for increased pump performance and reduced energy costs
    Particularly energy-efficient in accordance with the ErP Directive of the European Union (EU Regulation No. 547/2012)
    High-quality stainless steel inside and out for maximum reliability
    Resistance to abrasion by sand and other abrasive materials
    Resistance to aggressive water
    Protection against motor overheating in combination with optional electronic motor protection MP204
    Protection against dry running in combination with MP204
    Monitoring and communication via the MP 204 control unit for optimum pump operation

Notes:

The submersible pump may be used to pump pure, thin-bodied, non-explosive media without solid or long-fibre constituents and at a maximum temperature of 40°C. If a liquid with a density different from water is to be pumped, the motor power then required must be taken into account due to the change in hydraulic power. When pumping liquids with an aggressiveness greater than that of drinking water, special designs must be used. Please contact us in this case. The maximum sand content of the water must not exceed 50 g/m³. A higher sand content reduces the service life and increases the risk of the pump blocking. The pump can be installed vertically or horizontally.